|
 The Complete Air Compressor Workstation
Range: 7.5 HP to 30 HP (5.5-22kW)
Pressure: to a max of 15 Bar (217 psi)
Ready for use, just connect to your power supply and airline installation
Reduces costs & improves efficiency
Easy to use
Filtered, clean, dry compressed air
Compact in size
Extremely quiet
Self diagnostic facility
Low maintenance and servicing costs
Selected models available with Energy Saving Variable Speed
Product Highlights
The air compressor of the future available today!
A unique solution comprising of an encapsulated screw compressor, dryer, pre-filter, final filter, electronic drain all mounted on a 275 or 500 litre air receiver, ready to be installed and connected to the mains and air supply.
Each compressor is supplied complete with:
Refrigerant dryer (with R134A environmentally friendly refrigerant).
Compressed air pre-filter with filtration down to 3 micron.
Final filter with filtration down to 0,01 micron.
Automatic programmable condensate drain.
275 Lt. or 500 Lt Air receiver.
Optional Variable speed Inverter on selected models
The MC2 Controller // for more
Featuring a backlit display with four lines of twenty digits each allowing extended messages, 5 languages, special functions and/or emergency signaling LED's, the MC2 controller also features:
Possibility to expand the hardware
Possibility to interface with other compressors using MC2 controller, Daily and/or weekly operation programming for up to 4 compressors
Possibility of Remote Control of the compressor (by cable, by modem) allowing the unit to remotely start and stop
The Autorestart function, allows automatic start-up of the compressor after an eventual power cut off
Programmed routine maintenance
Diagnostic functions at different levels
Fault log
Rotation direction test for main motor and fan The TriAB Air End
The ABAC screw compressors are fitted with the unique TriAB air ends that are designed and built exclusively at the ABAC factories,which are certified to ISO 9001. The highest quality standards are strictly adhered to throughout the manufacturing process ensuring continuous high quality.
Highly developed, asymmetric rotor profiles with precision ground 5/6 lobe configuration, provides higher compressed air output with lower power consumption
Each rotor is fitted with 3 oversized high precision bearings allowing a longer air end life.
The shaft seal with a 3 lip design provides total protection from oil and other
contaminants
Toothed safety washers and special locking nut ensure that the rotor tolerances are set throughout the life of the unit for improved reliability Integrated Air Treatment Unit
All GENESIS compressors are fitted with a built in air treatment package comprising refrigerant dryer with R134A gas, pre-filter, final-filter and modular condensate drain.
The operation of the dryer and condensate drains is conveniently controlled by the compressors main MC2 controller this provides for efficient dew point control and allows the fridge compressor to cycle efficiently. The GENESIS is fitted with both pre and final high efficiency filtration resulting in particles, oil and water droplets being removed before entering the compressed air system.
The compressed air produced therefore is extremely clean and dry and suitable for use in applications in various industries. For added convenience all the various condensate drain points are connected to a common manifold which is then connected to a single condensate outlet which can be easily piped to a suitable collection facility.
Variable speed - Matching the air generation to demand and saving you power!
The Genesis I version with advanced high efficiency vectorial frequency inverter offers many advantages over normal air compressors. Provides a constant air pressure selectable to any value between 6 and 13 bar.
The compressed air generated precisely matches the demands of the system with no wastage
Soft start reduces current surges providing further energy savings
Constantly varying output between 25% and 100% capacity
Innovation
The new Genesis is a unique all encompassing compressed air station replacing the many individual components that comprise a traditional system, saving you valuable space. The new Genesis includes everything you need to provide a reliable source of high quality, dry, clean compressed air to your system in one convenient unit.
Low Noise Levels
With operating noise levels between 57db(A) and 69 dB(A) the Genesis compressor can be located directly into the working environment and nearer the point of use, creating a more comfortable workplace and reducing installation costs.
Reduced Maintenance
Special attention has been directed toward the ease of service in the design of the new Genesis compressor. Extended service intervals, quick and simple access to all components and the use of convenient spin on oil filter and air/oil separator allow for a minimum disruption and a reduction in maintenance costs.
Aestethic Design
The Genesis is a hardworking industrial machine designed for heavy use, even so the design of the new Genesis means that it looks good. The proportional, clean and modern design of the new Genesis is attractive in any environment.
Installation
A traditional compressed air system comprising eight individual components can be replaced entirely with a single Genesis compressed air station. The unique Genesis concept is not only convenient but is also much simpler to install, easier to move and requires far less space when compared to a traditional system. A simple connection to a suitable power supply and to the compressed air network is all that is required to effect an immediate installation.
Air Quality
The new Genesis compressor has been deigned from the outset to provide clean compressed air in line with key environmental objectives. This means the Genesis runs cooler and cleaner than other compressors. In addition the Genesis is fitted with an efficient air treatment package comprising refrigerant dryer with R134a gas, pre filtration, hyper filtration and modular condensate drain. The compressed air provided by the Genesis is exceptionally clean and dry, suitable for hundreds of sophisticated applications throughout industry.
|
|
